Fence Panel Installation Instructions

Fence Panel Installation Instructions
  1. Build a wooden frame as per dimensions provided above.
  2. APPLY a 3/4" x 3/4" WOODEN RETAINING STRIP AROUND THE MIDDLE OF ALL FRAME OPENINGS, USING 1 1/2" LONG GALVANIZED NAILS.
  3. INSERT (2) TOPPERS INTO PLACE, MAKING SURE THEY Touch in THE MIDDLE.
  4. USING A SCREW DRIVER, OR A POWER DRILL, APPLY #8-3/4 LONG WOOD SCREWS (STAINLESS) TO ALL HOLES, SECURING TOPPER PLATES TO WOODEN FRAME. (52) SCREWS ARE REQUIRED TO INSTALL ONE 8 FT SECTION, CONSISTING OF (2) BOTTOM SECTIONS AND (2) TOPPERS.
  5. APPLY 3/4" x 3/4" WOODEN TRIM, USING GALVANIZED NAILS, COVERING SCREWS.
  6. REPEAT STEPS #3 TO #5 FOR BOTTOM PLATES.

NOTE - It is important to apply screws to all holes to prevent the entire section from sagging over time.